Ring Pump RP-HX series : Pump head replacement type, Stepper motor drive

The world's smallest level flow rate.
Changing the tube is possible by replacement of the pumphead.
A wide range of flow levels is possible by using different pumphead.
Docking of the pumphead can be done in one action. No screw is necessary.
A stepper motor is used for driving the pump. The motor controller for exclusive use is sold separately.
( RE-C100, RE-C500/C501, RE-C600 )
An optional driver board for stepper motor control is available.

Autoclave sterilizable pumphead is available.
10 times autoclave sterilization with 121 degrees Celsius, 25 minutes is possible.
Color of the pumphead cover change to black, and the wire length change to 1,150 mm.

Download
Catalog (PDF)
Outline drawing (PDF)
3D CAD data (STEP)
2D CAD data (DXF)

Model No.	Model No. of pumphead	Autoclave sterilizable pumphead	Wire length L (mm) / ∗1 Connector	Discharge rate (µL/min)	Tube
Model No.	Model No. of pumphead	Autoclave sterilizable pumphead	Wire length L (mm) / ∗1 Connector	Discharge rate (µL/min)	Material	IDｘOD (mm)
Used with Motor controller RE-C100 and RE-C600 (without connector) Pumphead is not autoclave sterilizable.
RP-HXP5S-P4A-DC3VS	RK-HXP5S	No	15 cm / Without Molex connector	2 - 400	Silicone	0.5 x 1.5
RP-HX01S-1A-DC3VS	RK-HX01S		15 cm / Without Molex connector	5 - 1,000	Silicone	1.0 x 2.0
RP-HXP5F-P25A-DC3VS	RK-HXP5F		115 cm / Without Molex connector	2 - 350	Phar- Med BPT	0.5 x 1.5

Used with Motor controller RE-C100 and RE-C600 (without connector) Pumphead is autoclave sterilizable.
RP-HXP5S-P4E-DC3VS	RK- HXP5S-C	Yes	115 cm / Without Molex connector	2 - 400	Silicone	0.5 x 1.5
RP-HX01S-1H-DC3VS	RK- HX01S-D	Yes	115 cm / Without Molex connector	5 - 1,000	Silicone	1.0 x 2.0

Used with Motor controller RE-C500/C501 and RE-C600 (with connector) Pumphead is not autoclave sterilizable.
RP-HXP5S-P4G-DC3VS	RK-HXP5S	No	65 cm / With connector	2 - 400	Silicone	0.5 x 1.5
RP-HX01S-1J-DC3VS	RK-HX01S		65 cm / With connector	5 - 1,000		1.0 x 2.0
RP-HXP5S-P4H-DC3VS	RK-HXP5S		215 cm / With Molex connector	2 - 400		0.5 x 1.5
RP-HX01S-1K-DC3VS	RK-HX01S		215 cm / With Molex connector	5 - 1,000		1.0 x 2.0

Used with Motor controller RE-C500/C501 and RE-C600 (with connector) Pumphead is autoclave sterilizable.
RP-HXP5S-P4J-DC3VS	RK- HXP5S-C	Yes	215 cm / With Molex connector	2 - 400	Silicone	0.5 x 1.5
RP-HX01S-1L-DC3VS	RK- HX01S-D	Yes	215 cm / With Molex connector	5 - 1,000	Silicone	1.0 x 2.0

Motor driver board BD202411-Q can be used. (Coming with JST connector for connecting to the driver board.) Pump head does not support autoclave sterilization.
RP-HXP5S-P4A-DC24VS	RK-HXP5S	No	65 cm / With JST connector	2 ～ 400	Silicone	0.5 x 1.5
RP-HX01S-1A-DC24VS	RK-HX01S	No	65 cm / With JST connector	5 ～ 1,000	Silicone	1.0 x 2.0

Motor driver board BD202411-Q can be used. (Coming with JST connector for connecting to the driver board.) Pump head supports autoclave sterilization.
RP-HXP5S-P4B-DC24VS	RK-HXP5S-C	Yes	215 cm / With JST connector	2 ～ 400	Silicone	0.5 x 1.5
RP-HX01S-1B-DC24VS	RK-HX01S-D	Yes	215 cm / With JST connector	5 ～ 1,000	Silicone	1.0 x 2.0

∗1. Connection to certain motor controllers requires a Molex connector (referred to as "Molex connector"). Connection to the motor driver board requires a JST connector (referred to as "JST connector"). ∗1. The pump with a connector is required for use with the motor controller RE-C500/C501. ∗1. The pump without connectors can be used with RE-C100. ∗1. RE-C600 can be used with or without connector.

Model No.	With RE-C100 (µL/min)		With RE-C500,C501 (µL/min)
Model No.	1/4 micro-step	1/8 micro-step	With RE-C500,C501 (µL/min)
RP-HXP5S-P4A-DC3VS	5 - 400	2.5 - 200	2 - 400
RP-HX01S-1A-DC3VS	12 - 1,000	6 - 500	5 - 1,000
RP-HXP5F-P25A-DC3VS	4 - 350	2 - 180	2 - 350
RP-HXP5S-P4E-DC3VS	5 - 400	2.5 - 200	2 - 400
RP-HX01S-1H-DC3VS	12 - 1,000	6 - 500	5 - 1,000

The pump head can be attached to the base unit by rotating the pump head 180 degrees so that
the tube is facing downwards.

Stepper Motor Controller and Driver Board

This series is driven by a stepper motor.
To operate the stepper motor, a dedicated motor controller or driver board is required.
We offer the following motor controllers and driver board as a separately sold option. Please contact us if needed.
★ To use the driver board, you will need a pump equipped with wiring that includes
a JST connector compatible with the driver board (e.g., RP-HX***-***-DC24VS).

Motor controller RE-C600

Stepper motor controller for RP-HX, RP-TX, RP-QⅡB/C and RP-QⅢB/C series
Only one pump can be connected to the RE-C600.
Various pump operation sequences can be programmed using a PC connected to the RE-C600.
The pump can be stopped at a specified number of revolutions up to 30 revolutions, and a fixed discharge volume can be performed at a specified multiple of the discharge volume per revolution.
(Discharge volume data for one rotation is attached to the pump)
The program data of the operation sequence can be saved in RE-C600 and the pump can be operated without connecting to the PC.
Both with and without connector of motor wiring can be used.

Detail of RE-C600

Motor controller RE-C500/C501

Stepper motor controller for RP-HX, RP-TX, RP-QⅡB/C and RP-QⅢB/C series
A PC connected to the RE-C500 can control various pump operations.
Control 6 pumps with RE-C500
Up to 12 pumps can be controlled individually by adding one RE-C501.
Various pump operation sequences can be programmed.
The program data of the operation sequence can be saved in RE-C500 and the pump can be operated without connecting to the PC.
When connecting multiple pumps, different types of pumps can be mixed.

Detail of RE-C500/C501

Motor controller RE-C100 and Frequency counter RE-F100

RE-C100 is a stepper motor controller dedicated to the RP-HX / TX series.
Motor start / stop, forward / reverse rotation, and rotation speed adjustment are possible

The RE-F100 is a frequency counter that connects to the RE-C100 and displays the pulse frequency for setting the rotation speed.

Detail of RE-C100/F100

Stepper Motor Driver Board BD202411-Q

A driver board used to connect the motor and power supply, and to control the motor via external control signals.
Please prepare your own control device to send the control signals.
A DC 24V, 1A power supply is required. Please use a DC power source, such as a DC power supply unit or AC adapter.

Click here to view the driver board manual.