Site map Current position： Home > Products > Pump list > RP-HⅡ (Constant discharge pump system)

made by Aquatech

Constant discharge pump system RE-C300-HⅡC series

This system achieves constant discharge by combining the ring pump using the DC motor with encoder and a dedicated controller (RE-C300) to accurately stop the motor rotation at an integer multiple of one rotation.
Replaceable pump head.
You can choose from 4 types of tubes.
The pump head can be sterilized.
• Autoclave (25 minutes at 121℃) 10 times is possible.
However, pumps using "Transmaster TM-15" tubes
can not be autoclaved.
• Gamma ray sterilization (25kGy) is possible.

_∗2 Constant discharge pump system model No.	Voltage (DC V)	_∗1 Maximum discharge volume (mL)	Tube		System components • Pump model No. • Controller model No.
_∗2 Constant discharge pump system model No.	Voltage (DC V)	_∗1 Maximum discharge volume (mL)	Material	IDｘOD (mm)	System components • Pump model No. • Controller model No.
RE-C300-HⅡC04S	24	70	Silicone	4 x 6	• RP-HⅡC04S-70Z-DC24VE • RE-C300
RE-C300-HⅡC04F	24	70	PharMed BPT	4 x 6	• RP-HⅡC04F-70Z-DC24VE • RE-C300
RE-C300-HⅡC04W	24	70	Transmaster TM-15	4 x 6	• RP-HⅡC04W-70Z-DC24VE • RE-C300
RE-C300-HⅡC04C	24	70	SWFT	3.9 x 5.8	• RP-HⅡC04C-70Z-DC24VE • RE-C300
∗1. The maximum discharge volume is the discharge volume for one operation that can be set on the RE-C300. (The maximum number of rotations that can be set in one operation is 99 rotations.) ∗2. The first unit will be sold as a "Constant discharge pump system model No." that includes the pump and motor controller RE-C300.

*Install with the motor shaft horizontal.

Dedicated for the constant discharge pump system
Motor controller RE-C300

Dedicated motor controller for the constant discharge pump system
Install the dedicated software on your computer from the USB memory (included). By connecting the computer and RE-C300 with the USB cable (included), you can control various operations for the pump.
Various pump operation sequences can be programmed.