Ring Pump RP-H series
(Constant discharge pump system)

This system achieves constant discharge by combining the ring pump using the DC motor with encoder and a dedicated controller (RE-C300) to accurately stop the motor rotation at an integer multiple of one rotation.
Replaceable pump head.
You can choose from 4 types of tubes.
The pump head can be sterilized.
• Autoclave (25 minutes at 121℃) 10 times
is possible. However, pumps using
"Transmaster TM-15" tubes can not be
autoclaved.
• Gamma ray sterilization (25kGy) is

possible.

Constant discharge pump system model No.^∗2
System components Pump model No. / Controller model No.
Voltage (DC V)	_∗1 Maximum discharge volume (mL)	Tube
Voltage (DC V)	_∗1 Maximum discharge volume (mL)	Material^∗3	ID x OD (mm)

RE-C300-HC1.6S
RP-HC1.6S-7Z-DC24VE / RE-C300
24	7	Silicone	1.6 x 3.2

RE-C300-HC1.6F
RP-HC1.6F-7Z-DC24VE / RE-C300
24	7	PharMed BPT	1.6 x 3.2

RE-C300-HC1.6R
RP-HC1.6R-7Z-DC24VE / RE-C300
24	7	Versilon F-5500-A	1.6 x 3.2

RE-C300-HC1.6W
RP-HC1.6W-7Z-DC24VE / RE-C300
24	7	Transmaster TM-15	1.6 x 3.2

∗1. The maximum discharge volume is the maximum discharge volume for one operation that can be set on the RE-C300. (The maximum number of rotations that can be set in one operation is 99 rotations.) ∗2. The first unit will be sold as a "Constant discharge pump system model No." that includes the pump and motor controller RE-C300. ∗3. Some of Saint-Gobain's tube names are changed a few years ago. Versilon F-5500-A ↑ Fluran F-5500-A (Old name)

*Install with the motor shaft horizontal.

Dedicated for the constant discharge pump system
Motor controller RE-C300

Dedicated motor controller for the constant discharge pump system
Install dedicated software on a USB-connected computer to control various operations of the pump.
Various pump operation sequences can be programmed.