Programmable motor controller for RP-H series with the stepper motor
RE-C700
| Download |
|---|
| Manual (PDF) |
| Installation manual (PDF) |
- Motor controller only for RP-H series with the stepper motor.
- Only one pump can be connected to the RE-C700.
- Install the dedicated software on your computer from the USB memory (included). By connecting the computer and RE-C700 with the USB cable (included), you can control various operations for the pump.
- Pump operating sequences can also be programmed.
- The pump can be stopped at a specified number of revolutions up to 30 revolutions, and a fixed discharge volume can be performed at a specified multiple of the discharge volume per revolution.
(Discharge volume data for one rotation is attached to the pump) - The program data of the operation sequence can be saved in RE-C700 and the pump can be operated without connecting to the PC.
- Both with and without connector of motor wiring can be used.
| Name | Motor controller | |
|---|---|---|
| Model No. | RE-C700 | |
| Applicable pumps | RP-H series (Only for with the stepper motor) |
|
| Connection with the pump | Both wiring with and without connector can be used. | |
| Power source | DC5V 1A (AC adapter included) |
|
| Driving method |
Bipolar constant voltage | |
| Excitation mode |
1/4 micro-step driving | |
| Motor driving voltage |
5.2V Fixed | |
| Dimensions | 100 x 100 x 34 mm | |
| Accessories | AC adapter (Input : AC100-240V 50/60Hz, Output : DC5V 1A), USB memory stick (Computer software), USB cable (for PC connection) |
|