Programmable motor controller for RP-QⅡF
and RP-QⅢF
RE-C602
| Download |
|---|
| Manual (PDF) |
- Stepper motor controller for RP-QⅡF and RP-QⅢF series
- Only one pump can be connected to the RE-C602.
- Various pump operation sequences can be programmed using a PC connected to the RE-C602.
- The pump can be stopped at a specified number of revolutions up to 30 revolutions,
and a fixed discharge volume can be performed at a specified multiple
of the discharge volume per revolution.
(Discharge volume data for one rotation is attached to the pump) - The program data of the operation sequence can be saved in RE-C602 and the pump can be operated without connecting to the PC.
- Both with and without connector of motor wiring can be used.
| Name | Motor controller | |
|---|---|---|
| Model No. | RE-C602 | |
| Applicable pumps | RP-QⅡF, RP-QⅢF | |
| Connection with the pump | Both wiring with and without connector can be used. | |
| Power source | DC5V 1A (AC adapter included) |
|
| Driving method |
Bipolar constant voltage | |
| Excitation mode |
1/4 micro-step driving | |
| Motor driving voltage |
RP-QⅡF/QⅢF : 3.3V | |
| Dimensions | 100 x 100 x 34 mm | |
| Accessories | AC adapter (Input : AC100-240V 50/60Hz, Output : DC5V 1A), USB memory stick (Computer software), USB cable (for PC connection) |
|