Programmable motor controller for RP-HX,
RP-TX, RP-QⅡB/C and RP-QⅢB/C

RE-C600

RE-C600 Photo
Download
Manual (PDF)

  • Stepper motor controller for RP-HX, RP-TX, RP-QⅡB/C and RP-QⅢB/C series
  • Only one pump can be connected to the RE-C600.
  • Various pump operation sequences can be programmed using a PC connected to the RE-C600.
  • The pump can be stopped at a specified number of revolutions up to 30 revolutions, and a fixed discharge volume can be performed at a specified multiple of the discharge volume per revolution.
    (Discharge volume data for one rotation is attached to the pump)
  • The program data of the operation sequence can be saved in RE-C600 and the pump can be operated without connecting to the PC.
  • Both with and without connector of motor wiring can be used.

Example of use
Example of use

Connection
Connection (In case of only using RE-C600)

Spec
Name Motor controller
Model No. RE-C600
Applicable pumps RP-HX series, RP-TX series
RP-QⅡB/QⅡC, RP-QⅢB/QⅢC
Connection with the pump Both wiring with and without connector can be used.
Power source DC5V 1A
(AC adapter included)
Driving
method		 Bipolar constant voltage
Excitation
mode		 1/4 micro-step driving
Motor driving
voltage		 RP-QⅡB/QⅡC,
RP-QⅢB/QⅢC : 3.0V
RP-HX, RP-TX : 2.6V
Dimensions 100 x 100 x 34 mm
Accessories AC adapter
(Input : AC100-240V 50/60Hz,
Output : DC5V 1A),
USB memory stick
(Computer software),
USB cable (for PC connection)