Motor controller for RP-HX, RP-TX, RP-QⅡB/C and RP-QⅢB/C
RE-C100, RE-F100
| Download |
|---|
| Manual (PDF) |
- RE-C100 is the stepper motor controller for RP-HX and RP-TX series.
- Start/stop, rotational direction, and rotational speed of the pump can be controlled.
- The motor drive method is 1/4 or 1/8 micro-step drive method. (switchable)
- Two RP-TX pumps of the same type can be connected and operated. (Two pumps are the same operation. RP-TX only.)
- The number of operating pumps can be increased by the series connection of one RE-C100 for master and one or several RE-C100 for slave. (All pumps are same operation.)
- RE-C100 can control start/stop and rotation speed of the pump by pulse signals from an external source.
- RE-F100 is the frequency display which connects to RE-C100.
- Operation of the pump is possible by RE-C100 only. But if you want to adjust rotational speed more, you need to purchase RE-F100.
| Name | Motor controller |
|---|---|
| Model No. | RE-C100 |
| Applicable pumps | RP-HX ,RP-TX series |
| Connection with the pump | Only wiring without connector can be used. |
| Power source | DC6V 1.8A (Includes AC adapter) |
| Driving method | Bipolar constant voltage |
| Excitation mode | 1/4 micro-step or 1/8 micro-step driving |
| Motor driving voltage |
DC 2.6 V |
| Dimensions | W105 x D60 X H51 mm |
| Accessories | AC adapter (Input: AC100-240V 50/60Hz, Output: DC6V 1.8A) |